HALL SENSORS
 

Απάντηση: HALL SENSORS
 

http://www.mybike.gr/style_emoticons/default/think.gif ... τι ναι αυτο βρε παίδες!...πρωτη φορα το ακουω!

Απάντηση: HALL SENSORS
 

Απάντηση: HALL SENSORS
 

το κόστος του να αλλάξεις τους σένσορες μόνο από τη BOSCH είναι περίπου στα 100€ το έχει κάνει φίλος μου και είναι μια χαρά το μηχανάκι του μόνο που θέλει μεγάλη ακρίβεια και προσοχή στο περτσίνομα

Απάντηση: HALL SENSORS
 

Τι είναι HALL SENSORS ρε παιδιά !!!

Απάντηση: HALL SENSORS
 

Είναι τα "μάτια" της ηλεκτρονικής που βλέπουν τα Ανω-κάτω νεκρό σημείο και βρίσκονται στην πίσω μεριά του "καθρέπτη" στα boxer

Απάντηση: HALL SENSORS
 

Για τους Αγγλομαθείς :p:

Hall effect sensor

From Wikipedia, the free encyclopedia


Jump to: navigation, search
http://upload.wikimedia.org/wikipedi...arrows.svg.png
It has been suggested that this article or section be merged with Hall probe. (Discuss)http://upload.wikimedia.org/wikipedi...ll_sensors.png http://www.gsforum.gr/skins-1.5/comm...gnify-clip.png
The magnetic piston (1) in this pneumatic cylinder will cause the Hall effect sensors (2 and 3) mounted on its outer wall to activate when it is fully retracted or extended.


http://upload.wikimedia.org/wikipedi...ect_sensor.jpg http://www.gsforum.gr/skins-1.5/comm...gnify-clip.png
Clutch with Hall Effect sensor.


A Hall effect sensor is a transducer that varies its output voltage in response to changes in magnetic field. Hall sensors are used for proximity switching, positioning, speed detection, and current sensing applications.
In its simplest form, the sensor operates as an analogue transducer, directly returning a voltage. With a known magnetic field, its distance from the Hall plate can be determined. Using groups of sensors, the relative position of the magnet can be deduced.
Electricity carried through a conductor will produce a magnetic field that varies with current, and a Hall sensor can be used to measure the current without interrupting the circuit. Typically, the sensor is integrated with a wound core or permanent magnet that surrounds the conductor to be measured.
Frequently, a Hall sensor is combined with circuitry that allows the device to act in a digital (on/off) mode, and may be called a switch in this configuration. Commonly seen in industrial applications such as the pictured pneumatic cylinder, they are also used in consumer equipment; for example some computer printers use them to detect missing paper and open covers. When high reliability is required, they are used in keyboards.
http://upload.wikimedia.org/wikipedi...ensor_tach.gif
Hall sensors are commonly used to time the speed of wheels and shafts, such as for internal combustion engine ignition timing or tachometers. They are used in brushless DC electric motors to detect the position of the permanent magnet. In the pictured wheel carrying two equally spaced magnets, the voltage from the sensor will peak twice for each revolution. This arrangement is commonly used to regulate the speed of disc drives.

[edit] Hall Effect Sensor Interface

Hall effect sensor may require analog circuitry to be interfaced to microprocessors. These interfaces may include input diagnostics, fault protection for transient conditions and short/open circuit detection. It may also provide and monitor the current to the hall effect sensor itself. There are precision IC products available to handle these features. Example for Hall Effect Interface IC is MAX9921 from Maxim Integrated Products.

Απάντηση: HALL SENSORS
 

Εντανκς ρε μαγκίτη με λάβωσες στη καρδιά, καλάς'ρε πέρνα για ένα σερβίς Ελληνικό με Ελληνικά εργαλεία να γίνω και εγώ Αγγλομαθείς :yz
:sm7::sm7::sm7::sm7:

Απάντηση: HALL SENSORS
 

:D:D:D

Απάντηση: HALL SENSORS
 

Μήπως έχει κανένας ένα σετ χαλασμένους αισθητήρες να τους κάνουμε την "εγχείριση" με φώτο και να δούμε πόσο ακριβός κοστίζει η όλη δουλειά??